Products >> Filter Cartridges >>
- Product No.：CTO-10
CTO filter element/Water Filter Cartridge
material: sintering activated carbon
size: 5/10/11/20 inch
cover material: PVC
weight:0.5kg/picec(international standard filter cartridge)
filtration pore size :1 μm
maximum working pressure:0.5MPA
maximum working temperature:45℃
iodine adsorption value:900mg/g
The benzene adsorption amount:20-25%
The methylene blue adsorption value:13-16ml/g
removal ratio of COD :58.25%
Residual chlorine removal rate:58.25%
2. Low pressure drop;
3. No release of carbon fines;
4. Excellent flow rates, high dirt holding capacity and long service life;
5. Improve the taste;
6. High flow rate.
7. Remove adsorbed abnormal smell of chlorine, particulate pollution, to make water be liquid decoloring, clear and transparent.
simultaneously remove chlorine taste, odor and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt holding capacity of an efficient 5.0 μm nominal sediment filter. ACB filters are optimized for applications where they perform the role of both a sediment and activated carbon block. Used in residential and commercial water purification systems, food service, pre-and post-RO systems and organic solvents.
It's pressed by high adsorption value of coconut shell activated carbon, and then through sintering compression to form. At the same time, carbon filter is wrapped with a layer of non-woven fabrics from inside and outside respectively to ensure the carbon powders not falling down from itself. There is a soft butyl rubber cover existing in both ends of the filter, which ensures the well sealing of the filter cartridge.
E-mail: [email protected]
Add: NO.199 SHANGTUOLUO ROAD, XINPU TOWN CIXI, CHINA