20 inch granular activated carbon filter cartridge for Reverse osmosis RO system replacement

Product Description

Specification

 

material: coconut shell activated carton
filter form: Sintering filter
operating temperature: 4-45℃
filter fineness:1 μm
cover material: PVC
max work pressure: 400psi
residual chlorine removal rate: 96%
indine adsoprption: more than 1300mg/g
COD removal rate: 58.25%

 

Introduction

 

This cartridge should be installed with the gasket at the top of the unit showing ,Remove outside wrapper before installation.

 

After installation ,filter should be flushed with sufficient water to remove all traces of carbon fines.

It should be changed every six monthes or sooner if bad taste or odor return.

 

The filter should not be used where the water is micro biologically unsafe or with water of unknown quality without adequate disnfection.